Western Digital OpenFlex Data24 Manual page 14

EcoDesign Disclosures
Figure 12: IO Module (IOM) Removal
d. Repeat these steps to remove the remaining IO Module (IOM).
Step 8 : Uninstall the Chassis from the rack mounted rails.
a. From the front of the rack, using the T15 Torx screwdriver, loosen the two Torx captive screws
that secure the Chassis to the rail. Repeat this step to loosen the two Torx captive screws
that secure the Chassis to the remaining rail. The location of the captive screws are shown in
the following image.
Figure 13: Rack Ear Captive Screw Location
1. EU EcoDesign Disclosures
1.4 OpenFlex ™ Data24 Disassembly
10