Western Digital OpenFlex Data24 Manual page 22

EcoDesign Disclosures
Figure 27: Front System LED PCBA Screw Locations
d. On the PCBA, open the connector and separate the LED cable from the PCBA. Remove the
PCBA and leave the LED cable in place.
Figure 28: Front System LED PCBA Removal
e. Using a T7 Torx screwdriver, remove the four (4) screws securing each rack ear to the
Chassis (8 screws total). The screws are accessed from inside the left and right drive bays:
1. EU EcoDesign Disclosures
1.4 OpenFlex ™ Data24 Disassembly
18