Western Digital OpenFlex Data24 Manual page 29

EcoDesign Disclosures
Figure 41: IOM Bulkhead Removal
Remove power distribution board (PDB) B.
Step 18 :
a. Using a T7 Torx screwdriver, remove the three (3) screws from inside the bay for IO Module
(IOM) B:
Figure 42: PDB-B Screw Locations
b. Using a T10 Torx screwdriver, remove the four (4) screws holding PDB-B to the midplane:
1. EU EcoDesign Disclosures
1.4 OpenFlex ™ Data24 Disassembly
25