Western Digital OpenFlex Data24 Manual page 35

EcoDesign Disclosures
Figure 53: SSD LED PCBA Removal
Step 22 : Remove the midplane PCB.
a. Using a T10 Torx screwdriver, remove the sixteen (16) screws holding the midplane PCB to
the Chassis:
Figure 54: Midplane PCB Screw Locations
b. Lift the rear edge of the midplane PCB, and pull it toward the rear of the Chassis. This will
free the drive connectors from their holes in the mid-chassis support.
1. EU EcoDesign Disclosures
1.4 OpenFlex ™ Data24 Disassembly
31