EcoDesign Disclosures
Figure 23: System Fan Latch Operation
Figure 24: System Fan Module Removal
b. Repeat these steps to remove the remaining System Fan modules.
Step 13 :
Remove the Rack Ears and front system LED PCBA.
a. Using a T10 Torx screwdriver, remove the three (3) screws holding each cover to its rack ear
(6 screws total):
1. EU EcoDesign Disclosures
1.4 OpenFlex ™ Data24 Disassembly
16
Need help?
Do you have a question about the OpenFlex Data24 and is the answer not in the manual?
Questions and answers