evertz 7735CEM Manual page 26

7700 MultiFrame Manual
7735CEM Composite Encoder with Monitoring
Video processing
Video standard
Loss of video
Genlock source
Free-run freq
525 Fine phase
625 Fine phase
525 H phase
625 H phase
H Delay
525 V phase
625 V phase
V Delay
NTSC Colour Field
Phase
PAL-B Colour Field
Phase
Audio buffer
525 VITC line
625 VITC line
525 PESA line
625 PESA line
Default SID mode
Default SID mode
7735CEM-20
Gray background indicate un-implemented or un-tested features
Selecting this item takes you into the Video Processing Menu.
Selects the input video standard.
Selects the action to take when the input video is missing.
Selects the source of genlock timing including free-running.
Sets the VCXO free-running frequency.
Sets the fine phase position of the output signal with respect to NTSC Genlock
reference input.
Sets the fine phase position of the output signal with respect to PAL Genlock
reference input.
Sets the horizontal phase of the output signal to the NTSC Genlock reference
input.
Sets the horizontal phase of the output signal to the PAL-B Genlock reference
input.
Status display that shows the current horizontal input to output delay.
Sets the vertical phase of the output signal to the NTSC Genlock reference
input.
Sets the vertical phase of the output signal to the PAL Genlock reference input.
Status display that shows the current vertical input to output delay.
Sets the colour field phase of the NTSC output video.
Sets the colour field phase of the PAL-B output video.
Status of audio delay buffer.
Sets the line number for decoding Vertical Interval Time Code in NTSC/525 line
video.
Sets the line number for decoding Vertical Interval Time Code in PAL/625 line
video.
Sets the line number for decoding PESA format Source ID in NTSC/525 line
video.
Sets the line number for decoding PESA format Source ID in PAL/625 line
video.
Selects whether the Default SID msg will be shown when there is no source ID
on the incoming video.
Sets the message that will be shown when Default SID mode is enabled and the
SID window is turned on.
Revision 1.1.1