Setting The Level Bar Graph Size; Setting The Transparency (Opacity) Of Bar Graph Background; Setting The Transparency (Opacity) Of The Bar Graph Bars; Configuring The On-Screen Display Controls - evertz 7735CEM Manual

7700 MultiFrame Manual
7735CEM Composite Encoder with Monitoring
Bar graphs
Bar graphs 1 and 2
Colours
Custom ok red:
0 to 255

7.7.13. Setting the Level Bar Graph Size

Bar graphs
Size
Small,
Big

7.7.14. Setting the Transparency (Opacity) of Bar Graph Background

Bar graphs
Background opacity
0 to 64,
32

7.7.15. Setting the Transparency (Opacity) of the Bar Graph Bars

Bar graphs
Bars opacity
0 to 64,
64
7.8.

CONFIGURING THE ON-SCREEN DISPLAY CONTROLS

The On-screen display configuration menu items is used to configure the position and display
characteristics of the text windows. It is also used to program the GPIs, and the on/off states of the text
and bar graph windows. The chart below shows the items available in the On-screen display configuration
menu. The following sections give detailed information about each of the menu items.
Window position
Window enable
Text windows
7735CEM-34
Gray background indicate un-implemented or un-tested features
This control defines one of the component colours for a custom colour for
one of the regions of level bar graphs.
When the menu item is selected you are shown a screen, which displays
all three colour components, with an arrow (<) to the right of the colour
component you will be adjusting. In addition you are shown two boxes on
the screen, which show you the current custom colour value to aid you in
selecting the desired colour. The box on the left side of the screen shows
the colour with the bar graph background opacity value applied, while the
box on the right shows the colour with the bar graph bar opacity value
applied.
This control sets the vertical size of the level bar graphs.
Two sizes of bar graphs are available. The Big size is about ¾ of the
screen height while the Small size is about ½ of the screen height.
This control sets the bar graph background opacity or how much video
picture content will be visible through the bar graph backgrounds.
When set to the minimum value, very little of the bar graph background
colour will be visible over the video content. At the maximum value, very
little of the background video will be visible through the bar graph.
This control sets the bar graph foreground opacity or how much video
picture content will be visible through the bar graph backgrounds.
When set to the minimum value, very little of the bar graph colour will be
visible over the video content. At the maximum value, very little of the
background video will be visible through the bar graph.
Controls used to position each one of the On Screen windows.
Controls used to configure the GPI functions, and the on/off states of the text
and bar graph windows.
Controls used to set the text style, background colour and opacity for the On
screen windows.
Revision 1.1.1