Table of Contents
Advertisement
3.
SPECIFICATIONS
3.1.
SERIAL VIDEO INPUT
Standard:
Number of Inputs:
Connector:
Return Loss:
Embedded Audio:
Frequency Lock Range:
Lock up time on a hot switch:
3.2.
ANALOG BROADCAST VIDEO OUTPUT
Standard:
Number of Inputs:
Connector:
Signal Level:
Output Impedance:
DC Offset:
Return Loss:
Frequency Response:
Differential Phase:
Differential Gain:
SNR:
Output level control range:
Black level control range:
Chroma level control range:
Hue control range:
Minimum Delay:
Maximum Delay:
3.3.
REFERENCE VIDEO INPUT
Standard:
Number of Inputs:
Connector:
Signal Level:
Frequency Lock Range:
Input Impedance:
Return Loss:
Max Subcarrier Jitter:
Free-Running Frequency
Control Range:
Gray background indicate un-implemented or un-tested features
7735CEM Composite Encoder with Monitoring
SMPTE 259M-C – 525 or 625 line component.
1
BNC per IEC 169-8
>15dB to 270MHz
SMPTE 272M-A
±75ppm from nominal
TBD
NTSC, SMPTE 170M
PAL, ITU624-4
1
BNC per IEC 169-8
1V nominal
75 Ohm
0V +/- 50mV
>35dB to 10MHz
<+/- 0.1dB to 4 MHz (response will depend on selected filtering)
< 0.5° (< 0.3° typical)
< 0.5% (< 0.3% typical)
>75dB (black video, 100kHz to 5MHz)
±10%
±7.5 IRE
±10%
±15 deg. (NTSC only)
3 µs
1 frame + 3 µs (+S option only)
NTSC, SMPTE 170M
PAL, ITU624-4
1
BNC per IEC 169-8
1V nominal (0.5V to 1.5V)
±75ppm from nominal
75 Ohm or High impedance (jumper selectable)
>25dB to 10MHz
< 3 degrees
> +/- 10ppm (> +/- 270Hz)
Revision 1.1.1
7700 MultiFrame Manual
7735CEM-7
Advertisement
Table of Contents
