Setting The Fault Window Background Opacity; Setting The Fault Window Text Opacity; Setting The Fault Window Font Size; Setting The Blink Mode Of The Fault Windows - evertz 7735CEM Manual

Composite encoder with monitoring
Table of Contents

Advertisement

7700 MultiFrame Manual
7735CEM Composite Encoder with Monitoring

7.8.5.3. Setting the Fault Window Background Opacity

On-screen display configuration
Text windows
Fault window config
Background opacity
0 to 64
64

7.8.5.4. Setting the Fault Window Text Opacity

On-screen display configuration
Text windows
Fault window config
Text opacity
0 to 64
64

7.8.5.5. Setting the Fault Window Font Size

Similar window size menu items are available for the Fault 1 and Fault 2 windows.
On-screen display configuration
Text windows
Fault window config
Fault 1 window size
Normal
Big

7.8.5.6. Setting the Blink Mode of the Fault Windows

Similar blink mode menu items are available for the Fault 1 and Fault 2 windows.
On-screen display configuration
Text windows
Fault window config
Fault 1 blink
Disable
Enable
7735CEM-42
Gray background indicate un-implemented or un-tested features
This control sets the Fault window background opacity or how much
video picture content will be visible through the window background.
When set to the minimum value, very little of the window
background colour will be visible over the video content. At the
maximum value, very little of the background video will be visible
through the window background.
This control sets the Fault window text opacity or how much video
picture content will be visible through the text characters.
When set to the minimum value, very little of the white window text
will be visible over the video content. At the maximum value, very
little of the background video will be visible through the white
window text.
This control sets the font size of the program rating window.
When it is set to Big the font size will be double the height and width
of the Normal font size.
This control determines if the Fault 1 window will blink or be on solid
when the fault is active.
When it is set to Disable the fault window will be on steady when it
is active.
When it is set to Enable the fault window will blink when it is active.
Revision 1.1.1

Advertisement

Table of Contents
loading

This manual is also suitable for:

7700

Table of Contents