Media Families - Durst Rho 1012 Operating Instructions Manual

Rho 1012/1030
1 Navigation window
Navigation window
2004 – 2013 © Durst Phototechnik AG – www.durst-online.com, Rho 1012/1030, Issued 07/2013

2.4 Media families

As you must create separate media channels for the different medium
thicknesses and blanks for each material, the number of media channels
can become unclear very quickly. For this reason, you have the option
of combining multiple media channels into a media family, e.g. KAPA or
corrugated cardboard. Each media family is clearly identified by an ID number
(Family ID). If a job is transferred from the RIP server to the corresponding
input queue of the printer, it provides its ID number right away, thus indicating
the media family to which it belongs. If you select the media channel for a job
in the input queue, the software only offers you those media channels that are
part of the media family of the job for pre-selection.
On the Media Family tab, you can create new media families and edit and
delete existing media families.
Fig. 57 Media Family tab
All created media channels are listed in the navigation window (1). You
specify the sorting order with the ID and Name buttons.
2.4.1 Buttons on the right edge of the dialog window
A new media family is created with the New button.
New
You copy the selected media family and save it with a new name with the
Copy
the Copy button.
Parameters of the selected media family are modified with the Edit button.
Edit
The selected media family is deleted with the Delete button.
Delete
F Software
99 / 147