Durst Rho 1012 Operating Instructions Manual page 117

Rho 1012/1030
Start Queue Manager
Push on Top
2004 – 2013 © Durst Phototechnik AG – www.durst-online.com, Rho 1012/1030, Issued 07/2013
Fig. 74 Printing Queue dialog window
The printing process is started for the selected job with the Start Queue
button.
The selected job is moved to the front of the queue with the Push on Top
button.
5.2.1 Initiate printing process in the printing queue
✔ If printing occurs over the edge of the medium, the conveyor belt is taped
at the edges of the medium.
1. Press Printing Queue.

The Printing Queue dialog window appears.
 All jobs in line for printing are displayed in the queue.
2. To print a job, carry out the following steps:
– Select desired job.
– Press Start Queue.
 The current print status is displayed on the status line.
F Software
117 / 147