Durst Rho 1012 Operating Instructions Manual page 78

E Operation
78 / 147
Fig. 42
8. Secure both axis ends as follows:
– Disengage locking button (2).
– Slide sliding ring (1) over the axis end.
– Lock locking button.
10.3.3 Inserting empty core on the unloading side
Insert empty core to wind up the roll medium in the same manner as the
roll medium on the loading side.
2004 – 2013 © Durst Phototechnik AG – www.durst-online.com, Rho 1012/1030, Issued 07/2013
Securing the axis with a sliding ring
Rho 1012/1030