Durst Rho 1012 Operating Instructions Manual page 93

Rho 1012/1030
2004 – 2013 © Durst Phototechnik AG – www.durst-online.com, Rho 1012/1030, Issued 07/2013
4. Lay the medium (3) over the redirection rollers (2) under the yellow belt
(1) through the cutting unit.
5. Align a medium.
6. Close the cutting unit with the footswitch.
7. Lay on the tensioning roller (4) and lower with the line onto the medium.
8. Set the knife to the desired position (→ Page 65 / Adjusting the cutting
unit (longitudinal cut)).
1 2
E Operation
3
4
93 / 147