Loading The Roll Medium (Heavy Roll Tool 30) - Durst Rho 1012 Operating Instructions Manual

Rho 1012/1030
2004 – 2013 © Durst Phototechnik AG – www.durst-online.com, Rho 1012/1030, Issued 07/2013

10.3 Loading the roll medium (Heavy Roll Tool 30)

A roll medium is loaded consecutively in the following steps:
 Initiating loading procedure in the software
 Inserting roll medium on the loading side
 Inserting empty core on the unloading side
 Guiding roll medium through the printer
 Aligning the roll medium
 Setting the roll-end sensor
 Commissioning unwinding and winding units
10.3.1 Initiating loading procedure in the software
Load the desired media channel in the software. Ensure that Roll
Media and Heavy Roll Tool are activated in the media channel
(→ Page 104 / Managing media channels).
10.3.2 Inserting roll medium on the loading side
1. Move unwinding unit to the bottom position.
E Operation
75 / 147