Rho 1012/1030
2004 – 2013 © Durst Phototechnik AG – www.durst-online.com, Rho 1012/1030, Issued 07/2013
9.3 Adjusting the straight impacter
1. Loosen the fixing screw (1).
2. Adjust the desired position of the straight impacter (2) on the axis.
3. Tighten the fixing screw.
9.4 Adjusting the limiting plates
Adjust the horizontal position as follows:
–
Loosen the fixing screw (4).
–
Adjust the position of the bar (3) to the length of the plate media.
–
Tighten the fixing screw.
1
2
1
2 3
4
E Operation
69 / 147