Durst Rho 1012 Operating Instructions Manual page 24

Table of Contents

C Description

24 / 147

During printing, the print carriage (3) passes over the medium. The print

heads on the print carriage print the medium with ink. The UV lamps in the

UV lamp head (4) dry the ink on the medium.

The printer is operated at the workstation (6).

Usage of the automatic feed table (8) allows plate media (7) to be fed

Plate media

continuously on a larger scale.

If a registering table is used, thin plate media can be fed manually.

Compressed-air-controlled stops ensure optimal alignment of the plate

medium.

On the unloading side the printed plate medium is output on the automatic

removal table (2). If the stacking unit (1) is used, the plate medium can be

stacked.

The automatic feed table (8), on which a roller attachment is mounted, can

Roll media

be used to print smaller roll media.

A Heavy Roll Tool can be docked onto the printer on the loading and

unloading sides to printer larger roll media.

If an XY cutter is used, the roll medium can be can cut in the longitudinal and

transverse direction on the unloading side.

Rho 1012/1030

Table of Contents

Rho 1030