Table of Contents
Advertisement
Rho 1012/1030
2004 – 2013 © Durst Phototechnik AG – www.durst-online.com, Rho 1012/1030, Issued 07/2013
Fig. 41
Opening the groove
5. Open grooves of the right and left roll mounts in the following manner:
–
Disengage locking button (2).
–
Slide sliding ring in such a way (1) that the groove is exposed.
High weight of the medium!
Danger of crushing when inserting the ends of the axes into the roll
mount
Wear protective gloves.
When loading the roll, do not grip the ends of the axes.
6. Using a hand lift, position the roll with the axis in such a way that the axis
ends are located above the grooves in the roll mounts.
7. Move unwinding unit to the top position. Allow the axis ends to slide into
the grooves and take the roll upward.
E Operation
77 / 147
Advertisement
Table of Contents
