Table of Contents
Advertisement
E Operation
56 / 147
Fig. 27
4. Connect power cable to the connector on the unwinding unit and to the
connector on the printer (1).
5. Connect the control cable (2) to the connection on the unwinding and
winding units.
6. Set the key switch at the printer to 1 (normal mode).
2004 – 2013 © Durst Phototechnik AG – www.durst-online.com, Rho 1012/1030, Issued 07/2013
Connect the power and control cables.
Rho 1012/1030
Advertisement
Table of Contents
