Stacking Unit (Optional) - Durst Rho 1012 Operating Instructions Manual

Rho 1012/1030
Components
1 Limiting plates
2 Straight impacter
3 Compressed-air nozzles
2004 – 2013 © Durst Phototechnik AG – www.durst-online.com, Rho 1012/1030, Issued 07/2013

1.3 Stacking unit (optional)

The stacking unit stacks printed plate media automatically.
Task
1
Fig. 8
Compressed-air nozzles (3) generate an air cushion on which the printed
Function
plate media slide into the stacking unit. The straight impacter (2) moves to
and fro on the axis and automatically pushes the stack flush to the side wall
of the stacking unit. The limiting plates (1) are set to the length of the plate
media and limit the stack to the rear.
A light barrier detects the height of the plate stack and automatically adjusts
the vertical position of the table.
2
Stacking unit
3
C Description
27 / 147