The Status Bar; Basic Operation; Setting Up Printer; Switching-On Time - Durst Rho 1012 Operating Instructions Manual

F Software
96 / 147

1.3 The status bar

The status bar informs you of the important current data of the printer, e.g.
loaded medium, medium width, remaining length and ink fill level.
Fig. 53 Status bar

1.4 Basic operation

You can operate all dialog elements, e.g. buttons, scroll bars and arrow
symbols, just by pressing the touch screen.
You can also use the keyboard, trackball and mouse.
1.4.1 Starting the software
✔ Monitor and computer are switched on
✔ The Linux operating system has been started
Double-press
1.4.2 Exiting the software
1. Press
 The Durst Rho dialog window appears.
2. Confirm with Yes.
1.4.3 Modifying parameters
To change the parameters on the tabs, the general procedure is as follows:
1. Press Edit.
2. Modify desired parameters.
3. Press Save.

2 Setting up printer

2.1 Switching-on time

Define the following settings on the Auto Timer tab:
2004 – 2013 © Durst Phototechnik AG – www.durst-online.com, Rho 1012/1030, Issued 07/2013
.
.
Rho 1012/1030