Printing; Input Queue - Durst Rho 1012 Operating Instructions Manual

Rho 1012/1030
2004 – 2013 © Durst Phototechnik AG – www.durst-online.com, Rho 1012/1030, Issued 07/2013
4.6.2 Editing existing media channel
1. Press Media.
2. Select desired media channel in the navigation window.
3. Select desired tab or sub-tab.
4. Press Edit.
5. Edit desired parameters.
6. Press Save.
4.6.3 Deleting media channel
1. Press Media.
2. Select desired media channel in the navigation window.
3. Press Delete.
4.6.4 Loading/unloading media channel
✔ The media channel is created
1. Press Media.
2. Select desired media channel in the navigation window.
3. Press Load/Unload.

5 Printing

Once the job has been prepared on the RIP server and transferred to the
workstation of the printer, printing occurs in the following steps:
 Prepare job in the input queue (→ Page 113 / Input queue)
 Transfer job to the printing queue (→ Page 113 / Input queue).
 Initiate printing process in the printing queue (→ Page 116 / Printing
queue).

5.1 Input queue

You prepare jobs for printing in the input queue under the Input Queue
button. As soon as a job is transferred from the RIP server to the workstation,
it appears in one of the corresponding input queues.
F Software
113 / 147