Durst Rho 1012 Operating Instructions Manual page 60

E Operation
60 / 147
Position
9
10
11
7.2.2 Commissioning winding and unwinding units
Carry out the following steps respectively at the winding and unwinding units:
✔ The winding and unwinding units are connected to the printer
1. Set selector switch to Manual.
2. Press the START button.

The lamp lights up
Power is supplied to the Heavy Roll Tool 60 and it can be operated.
7.2.3 Setting axis drives to automatic operation
✔ Winding and unwinding units are operating
Depending on the desired rotation direction, set the selector switch to
Auto Forward or Auto Reverse.
7.2.4 Rotating axis drives forward and in reverse manually
✔ Winding and unwinding units are operating
1. Set selector switch to Manual.
2. Press and hold the FORWARD or REVERSE button as long as desired.
7.2.5 Moving the roll mounts upward or downward
✔ Winding and unwinding units are operating
Danger of collision while moving up and down with opened roll mounts!
Damage to the Heavy Roll Tool
Close the roll mounts before moving up or down.
2004 – 2013 © Durst Phototechnik AG – www.durst-online.com, Rho 1012/1030, Issued 07/2013
Button designation
REVERSE button
Selector switch
LOAD button
Rho 1012/1030
Function
Transporting the roll medium
backward by hand
Switching between the
following operating modes:
 Manual: Manual mode
 Auto Forward: Forward
direction of movement in
automatic mode
 Auto Reverse: Reverse
direction of movement in
automatic mode
Moving the dancing rollers
upward