B Safety
10 / 147
B Safety
Read these operating instructions before using the printer and ensure
that you have understood everything!
If it is determined that damage has been caused by a person's
non-compliance with these operating instructions, Durst Phototechnik
AG is in no way liable. Safe operation of the printer is only ensured
when the following safety precautions and warnings are observed
exactly.
1 Intended use
The printer is suitable for printing plate and roll media in the industrial field
within the specified limits (→ Page 143 / Technical data). The following
framework conditions apply in particular:
The printer may only be operated in closed rooms.
Only Durst-certified inks and media may be used. Other inks or media
may only be used after agreement with Durst Phototechnik AG.
Intended use includes only the activities described in these operating
instructions. Transport, installation, commissioning, decommissioning,
disassembly and disposal of the components may only be performed by
service technicians authorized by Durst Phototechnik AG.
1.1 Impermissible use
The printer may not be used to print the following media:
Foodstuffs
Animals
Media outside the specified limit values
Media with an ignition point of less than 150 °C (302 °F)
2 Duties of the owner
To ensure the safety of personnel, the owner must take the following safety
measures:
2.1 Safety measures
Ensure that the personnel possesses the appropriate qualifications and
is sufficiently trained. Brush up on knowledge by taking training courses
on a regular basis.
Provide the personnel with the stipulated protective equipment.
Keep the warnings on the printer in a legible, visible and clean condition.
Ensure sufficient lighting.
2004 – 2013 © Durst Phototechnik AG – www.durst-online.com, Rho 1012/1030, Issued 07/2013
Rho 1012/1030