Operating Drives Of The Unwinding And Winding Units - Durst Rho 1012 Operating Instructions Manual

Rho 1012/1030
1 START button
2 Lamp
3 FORWARD button
4 UP button
5 Scale
6 Controller
7 Emergency-Stop switch
8 DOWN button
9 REVERSE button
10 Selector switch
11 LOAD button
2004 – 2013 © Durst Phototechnik AG – www.durst-online.com, Rho 1012/1030, Issued 07/2013
7.2 Operating drives of the unwinding and winding
units
7.2.1 Operating elements
1
11
Fig. 30 Operating elements
The drives of the unwinding and winding units are operated at the operator
panels, one of which is located on each of the right and left sides.
Position Button designation
1 START button
2 Lamp
3 FORWARD button
4 UP button
5
Scale
6
Controller
7 Emergency-Stop switch
8 DOWN button
2 3 4
10 9 8
E Operation
5 6
7
Function
Activating the Heavy Roll Tool
60
 Lights up: Heavy Roll Tool
60 operating
Flashing: Fault (e.g. error

message or no medium
present)
Transporting the roll medium
forward by hand
Moving the roll mounts upward
Reading the horizontal position
Fine positioning the roll
medium horizontally
Triggering an emergency stop
Moving the roll mounts
downward
59 / 147