Durst Rho 1012 Operating Instructions Manual page 135

Rho 1012/1030
2004 – 2013 © Durst Phototechnik AG – www.durst-online.com, Rho 1012/1030, Issued 07/2013
Fig. 91 Saturating cleaning cloth with cleaning solution
3. Saturate cleaning cloth with cleaning solution.
Fig. 92 Wiping print head
4. Depending on the requirements, wipe the YM and MY print heads or
all the print heads wet along the slot once from back to front until all
remaining color residues or coatings have been removed. The print head
surface must be bare.
5. Prepare cleaning access point for printing.
6. Print to stabilize the nozzles.
G Service
135 / 147