Emergency Operation With A Defective Media Feed Roll Unit; Emergency Operation With A Defective Hmd Unit; Exchanging The Components Hmd Unit And Mfr Unit - Durst Rho P10 200 Service Manual

2 Emergency operation
Tab. 3: Available values for RhoUVLampEmergencyOperation
4. Save the DurstPrinter.setup file.
5. Restart the printer software.
6. Select the Configuration tab.
7. Press the Send to Rho button in the Feature Data area.
2.2

Emergency operation with a defective media feed roll unit

When the printer is switched off, the height of the media feed roll unit can be adjusted
manually by means of the toothed belt.
1. Activate emergency operation of the MFR motor in the DurstPrinter.setup file: Change the
value for
with the respective value.
Mode
Not in emergency operation
Operation without an MFR unit
Tab. 4: Available values for RhoMediaFeedRollConfiguration
2. Save the DurstPrinter.setup file.
3. Restart the printer software.
4. Select the Configuration tab.
5. Press the Send to Rho button in the Feature Data area.
2.3

Emergency operation with a defective HMD unit

The same types of electrical components are used for the height adjustment of the media
feed roll unit (MFR) and of the print carriage (HMD). Of course the motors have different
motor addresses and programs, but can however be interchanged.
In the event of a defective HMD motor, the MFR motor can also be used for emergency
operation.
The emergency operation works in case of a defect of the following electrical components:

Reference switch

Limit switch

MDrive filter PCB

Motor
2.3.1

Exchanging the components HMD unit and MFR unit

1. Establish which component of the HMD unit is defective.
2. Remove the corresponding part from the MFR unit.
3. Activating emergency operation with a defective media feed roll unit ( Chapter 2.2, p. 8).
8
RhoMediaFeedRollConfiguration
2014 © Durst Phototechnik DIT GmbH, Diagnostics, Edition 09.04.2014
accordingly and insert the parameter
Value for
RhoMediaFeedRollConfiguration
0
1
Rho P10 200/250