Testing The Encoder During Printing - Durst Rho P10 200 Service Manual

3 Diagnostics
Channel
CH1
CH2
CH3
CH4
Tab. 24: Channel settings
3.5.2

Testing the encoder during printing

Printing the test pattern
 The media transport analysis must have been prepared ( Chapter 3.5.1, p. 52)
 The printer must be ready to print
1. Load suitable medium.
Area
Media type
Media width
HMD
Vacuum
Media feed roll unit distance
Tab. 25: Media settings for the encoder test
2. In the "Communication Terminal" software tool: Press the Show Messages button.
3. In the printer software: Select the Test pattern tab.
54
Status
On
On
On
On
Settings
Roll media
Alternatively: Slide in board media of 4.5 m length
and boards end to end
Maximum possible width
2 mm
Maximum
10 mm

2014 © Durst Phototechnik DIT GmbH, Diagnostics, Edition 09.04.2014
Variable
Feedback Position
Feedback Velocity
Global Variables –
Target Position
Global Variables –
YGO (or MGO)
Make sure that the rolls do not touch the
material.
Rho P10 200/250
Axis
( Chapter 3.5.1,
p. 52, determining
the axis number)