Vistalink; Monitored Parameters; Controlled Parameters; Vistalink Traps - evertz 7700 Multiframe Manual

6.2.

VISTALINK

MONITORED PARAMETERS

®
The following parameters can be remotely monitored through the VistaLINK
Parameter
Signal Standard
Optical Power
6.3. VISTALINK

CONTROLLED PARAMETERS

®
The following parameters can be remotely controlled via the VistaLINK
Parameter
Signal Rate
Fiber LOS GPO Trigger
GPO Polarity
Optical Power Alarm
Threshold
6.4. VISTALINK

TRAPS

®
The following parameters can be remotely enabled and monitored through the VistaLINK
traps in the Alarm View.
Trap
Signal Loss
Optical Power Below
Threshold
7707OE-3G-1 3G/HD/SDI Re-Clocking Optical to Electrical Converter
Description
A range of values describing the detected video signal rate.
A range of values describing optical power at the fiber input.
Table 6–1: VistaLINK
Description
Sets reclocking rate.
Sets loss of fiber signal GPO mode.
Sets GPO polarity.
Sets optical power level that triggers an alarm if the fiber
signal is lost.
Table 6–2: VistaLINK
®
Description
Triggers on loss of input video signal.
Triggers on optical power below set threshold.
Table 6–3: VistaLINK
Revision 1.0
7700 MultiFrame Manual
Monitored Parameters
®
interface.
®
Controlled Parameters
Traps
®
interface.
®
interface as
®
Page-15