Table of Contents
Advertisement
SMPTE 274M:
The SMPTE standard for bit parallel digital interface for high definition component video
signals with an active picture of 1080 lines x 1920 pixels.
SMPTE 291M:
The SMPTE standard for encoding ancillary data packets in serial digital video signals.
SMPTE 292M:
The SMPTE standard for high definition serial digital component interfaces.
SMPTE 296M:
The SMPTE standard for bit parallel digital interface for high definition component video
signals with an active picture of 720 lines x 1280 pixels.
SMPTE 299M:
The SMPTE standard for embedding audio in serial digital high definition
(SMPTE 292M) video signals.
SMPTE RP188:
The SMPTE recommended practice for embedding SMPTE 12M timecode into ancillary
data packets in serial digital video signals.
sF:
(Also known as segmented frame) The picture is progressively scanned, however divided into
two segments, containing the odd and even lines. The segments are then sent out the serial
digital interface in the same way that the fields of an interlaced video signal are. This format is
often used at nominal frame rates of 24, 25 or 30 frames per second.
TRS:
Timing reference signals used in composite digital systems. (It is four words long).
TRS-ID:
Abbreviation for "Timing Reference Signal Identification". A reference signal used to maintain
timing in composite digital systems. (It is four words long.)
User bits: 32 bits in the time code are user assignable. They typically are used to contain reel numbers,
scene and take numbers, or other user-oriented data.
OVERVIEW
HD9010-SIE High Definition Source ID Encoder Manual
Revision 1.2
Page 1-6
Advertisement
Table of Contents
