Table of Contents
Advertisement
Notices
© Agilent Technologies, 2006
No part of this manual may be reproduced
in any form or by any means (including
electronic storage and retrieval or transla-
tion into a foreign language) without prior
agreement and written consent from Agi-
lent Technologies, Inc. as governed by
United States and international copyright
laws.
Agilent Technologies, Deutschland GmbH
Herrenberger Straße 130
71034 Böblingen, Germany.
Manual Part Number
N4373-90A01
Edition
First edition, May 2006
Subject Matter
The material in this document is subject to
change without notice.
Agilent Technologies makes no warranty of
any kind with regard to this printed mate-
rial, including, but not limited to, the
implied warranties of merchantability and
fitness for a particular purpose.
Agilent Technologies shall not be liable for
errors contained herein or for incidental or
consequential damages in connection with
the furnishing, performance, or use of this
material.
Printing History
New editions are complete revisions of the
guide reflecting alterations in the function-
ality of the instrument. Updates are occa-
sionally made to the guide between
editions. The date on the title page
changes when an updated guide is pub-
lished. To find out the current revision of
the guide, or to purchase an updated guide,
contact your Agilent Technologies repre-
sentative.
Warranty
This Agilent Technologies instrument prod-
uct is warranted against defects in material
and workmanship for a period of one year
from date of shipment. During the warranty
period, Agilent will, at its option, either
repair or replace products that prove to be
defective.
For warranty service or repair, this product
must be returned to a service facility desig-
nated by Agilent. Buyer shall prepay ship-
ping charges to Agilent and Agilent shall
pay shipping charges to return the product
to Buyer. However, Buyer shall pay all ship-
ping charges, duties, and taxes for products
returned to Agilent from another country.
Agilent warrants that its software and firm-
ware designated by Agilent for use with an
instrument will execute its programming
instructions when properly installed on that
instrument. Agilent does not warrant that
the operation of the instrument, software,
or firmware will be uninterrupted or error
free.
Limitation of Warranty
The foregoing warranty shall not apply to
defects resulting from improper or inade-
quate maintenance by Buyer, Buyer-sup-
plied software or interfacing, unauthorized
modification or misuse, operation outside
of the environmental specifications for the
product, or improper site preparation or
maintenance.
No other warranty is expressed or implied.
Agilent Technologies specifically disclaims
the implied warranties of Merchantability
and Fitness for a Particular Purpose.
Exclusive Remedies
The remedies provided herein are Buyer's
sole and exclusive remedies. Agilent Tech-
nologies shall not be liable for any direct,
indirect, special, incidental, or consequen-
tial damages whether based on contract,
tort, or any other legal theory.
Assistance
Product maintenance agreements and
other customer assistance agreements are
available for Agilent Technologies prod-
ucts. For any assistance contact your near-
est Agilent Technologies Sales and Service
Office.
Certification
Agilent Technologies Inc. certifies that this
product met its published specifications at
the time of shipment from the factory.
Agilent Technologies further certifies that
its calibration measurements are traceable
to the United States National Institute of
Standards and Technology, NIST (formerly
the United States National Bureau of Stan-
dards, NBS) to the extent allowed by the
Institutes's calibration facility, and to the
calibration facilities of other International
Standards Organization members.
ISO 9001 Certification
Produced to ISO 9001 international quality
system standard as part of our objective of
continually increasing customer satisfac-
tion through improved process control.
Advertisement
Table of Contents
