Table of Contents
Advertisement
Agilent N4373A Lightwave Component Analyzer, First Edition
patchcord supplied
Click the [OK] button to proceed.
The patchcord has the following part number:
Single- mode angled connector: N4372- 87902
Single- mode straight connector: N4372- 87904
Multi- mode: N4372- 87903
9 When asked whether you want to save the data
• If you can use this calibration data again, click [Yes],
give your calibration data file a name, and click [Save].
• If you want to calibrate the system for your
measurement setup, or if you will have no need to
reuse or refer to this calibration data, click [No].
10 When the message part is displayed, click the [OK] button
to start the measurement.
Making Measurements on the PNA
67
Advertisement
Table of Contents
