Table of Contents
Advertisement
Troubleshooting and Maintenance
Reinstalling the Lightwave Component Analyzer software on the PNA
Making a backup of the LCA files
Measurement preparation
100
1 Make a regular backup of the directory
C:\Program Files\Agilent\Network Analyzer\Applications\L
CA\Table
This includes all the calibration and other data.
Before running a measurement, check to make sure the PNA
address is set correctly.
Although no GPIB cable needs to be connected to the optical
test set, GPIB is used from the internal controller by the
measurement macro, so the GPIB address needs to be set.
GPIB address configuration screen (measuring device)
The screen used to set the GPIB address for the measuring
device is shown below.
To get to the GIPB address configuration screen, from the
PNA menu screen, select [System] > [Configure] >
[SICL/GPIB].
The following screen will be displayed.
Agilent N4373A Lightwave Component Analyzer, First Edition
Advertisement
Table of Contents
