Table of Contents
Advertisement
Getting Started
Instrument markings
WARN IN G
WARN IN G
WARN IN G
12
The instruction manual symbol. The product is marked with this
warning symbol when it is necessary for the user to refer to the
instructions in the manual.
The laser radiation symbol. This warning symbol is marked on
products which have a laser output.
The AC symbol is used to indicate the required nature of the line
module input power.
The ON symbols are used to mark the positions of the instrument
power operating switch.
The CE mark is the conformity marking of the European Community.
The C-Tick mark is a certification of the Australian Communications
Authority.
The Stand-By symbols are used to mark the positions of the
instrument power operating switch.
The CSA mark is a the certification mark of the Canadian Standards
Association.
If this product is not used as specified, the protection provided by
the equipment could be impaired. This product must be used in a
normal condition (in which all means for protection are intact)
only.
No operator serviceable parts inside. Refer servicing to qualified
service personnel. To prevent electrical shock do not remove
covers.
This is a Safety Class 1 Product (provided with protective earth).
The mains plug shall only be inserted in a socket outlet provided
with a protective earth contact. Any interruption of the protective
conductor inside or outside of the instrument is likely to make the
instrument dangerous. Intentional interruption is prohibited.
Agilent N4373A Lightwave Component Analyzer, First Edition
Advertisement
Table of Contents
