Table of Contents
Advertisement
Making Measurements on the ENA
Making O/E measurements
48
The patchcord has the following part number:
Single- mode angled connector: N4372- 87902
Single- mode straight connector: N4372- 87904
Multi- mode: N4372- 87903
9 When asked whether you want to save the data
• If you can use this calibration data again, click [Yes],
give your calibration data file a name, and click [Save].
• If you want to calibrate the system for your
measurement setup, or if you will have no need to
reuse or refer to this calibration data, click [No].
10 When the message part is displayed, click the [OK] button
to start the measurement.
You can now connect your
device under test.
The measurement begins
automatically.
Please refer to the user
guide and online help of
the network analyzer for
further information on
measuring.
Agilent N4373A Lightwave Component Analyzer, First Edition
DUT
in
out
Advertisement
Table of Contents
