Table of Contents
Advertisement
Accessories
LCA accessories:
SCPI command converter
Agilent N4373A Lightwave Component Analyzer, First Edition
Calibration kits:
http://www.home.agilent.com/USeng/nav/-536890127.0/pc.html
Network Analyzer time domain options:
Network Analyzer Time Domain Options:
For N5230A: N52300- 010
for E5070B: E5070BU- 010
for E5071B: E5071BU- 010
Additional information on Agilent network analyzers:
http://www.home.agilent.com/USeng/nav/-11898.0/pc.html
Agilent provides a free command converter (cXL) to translate SCPI
commands from 875X, 872X 8510 and 8703X to PNA compatible SCPI
commands.
Please note, some commands are not supported, but can be emulated with
macros for PNA.Macros can only be called remotely by "COM" interface.
Following 8703X commands can not be supported (as the N4373A LCA
does not support required measurements)
• MEASOE1(O/E measurement at RF port 1)
• MEASO1(optical reflection measurement)
The command converter and additional information is available at
http://na.tm.agilent.com/pna/cxl/
Ordering Information
143
Advertisement
Table of Contents
