Agilent N4373A Lightwave Component Analyzer, First Edition
9 Click on [Start].
The Lightwave Component Analyzer prepares for the
calibration.
10 When prompted, connect the Optical Output to the Optical
Input.
Press [OK], with the optical patchcord supplied.
The patchcord has the following part number:
Single- mode angled connector: N4372- 87902
Single- mode straight connector: N4372- 87904
Multi- mode: N4372- 87903
The Lightwave Component Analyzer calibrates the
optical/optical measurement
11 When asked whether you want to save the data
Getting Started
27