TransAct Ithaca 280 Programmer's Manual page 66

Configuring Your ITherm
CD ESC BEL Parm.
Microline Mode
Cash Drawer Time
Cash Drawer Sense
External User Store
Electronic Journal
External User Store
EJ Manual Print
EJ Record Numbers
User Store
On/Off Switch
Audio Alert
Cutter Option
Pre-Cut Feed or Tear
Point Adjust
Cutter Speed
Note: There are other features that may be configurable. It is intended
that if you need to change them, you will contact TransAct Technical
support for assistance.
Page 54
®
280 Printer
The Microline Emulation
has the option of using
the ESC BEL command
to operate the cash
drawer
There are three
Microline modes
The cash drawer fire
time is adjustable in the
Ithaca emulation.
The sense of the cash
drawer open status can
be reversed.
Flag for user store in use
or configurable. If the
user store is in use and
has data in it, it can not
be reconfigured.
This specifies the
amount of external flash
available for the
electronic journal or user
data space.
This indicates the
amount of external flash
that is available for user
storage (Graphics and
characters.)
This sets whether or not
the manual electronic
journal options are
available.
This options sets
weather or not the
record number is printed
with journal entries.
This option sets a lock
on user store that
prevents any changes to
the data.
This option disables the
On/Off switch
This option configures
the operation of the
audio alert
This activates or
deactivates the auto
cutter
This option sets how
much the cut point is
adjusted before the auto
cut or manual tear-off.
This option adjusts the
auto cutter speed to
allow the use of thicker
paper.
Rev K
®
iTherm 280 Programmer's Guide
Enabled
Disabled
M50, M50 Plus, OKI
ML192
10 to 250 Ms
Normal,
Inverted
In use or configurable.
1 to 31 64K blocks
1 to 31 64K Blocks
Enabled
Disabled
Enabled
Disabled
Unlocked
Locked
Enabled
Disabled
Off, 50 ms to 1 Second
in 50 mSec steps
Active
Inactive
0 or none to 20 mm.
130 to 80 where 80 is
the slowest speed.
Disabled
M50
250 Ms
Normal
Not Settable.
2
This is not settable. It
equals 32 – the
Electronic Journal
setting.
Enabled
Enabled
Unlocked
Enabled
250 mS
Active if the printer is
equipped with an auto
cutter.
0
100