TransAct Ithaca 280 Programmer's Manual page 24

Specifications and Requirements

CPI selections from 8 to 30 CPI

Paper Out sensor

Multiple printer emulations: Ithaca M80/M80+, Ithaca M50/M151 Micro-line,
Epson Extended, Epson TM-T88II/III, TM-T90, U200, U300, Axiohm
A793/4/5, Citizen and Star

Maximum 8K buffer (adjustable)

2 Megabytes Flash Memory

2 Megabytes RAM

APA and Epson graphics

Bar Codes: Code 39, Code 93, Code 128, Interleaved 2 of 5, UPC-A, UPC-
E, EAN-8, EAN-13, EAN-14, PDF417 stacked symbology and Codabar

65 Language sets (including Euro symbol)

Metal receipt tear off

8 dots/mm. thermal print head resolution

ON/OFF button located on front of printer

Cable routing strain relief

Power/Error/Paper LEDs

Paper feed button

Cover open button

Settable cash drawer configurations (Ithaca, Epson, or Star)

Spill proof design- vertical main PCB mounting

58 mm. or 80 mm. paper width – factory-settable

4.0 inch (101 mm.) Paper roll diameter

Portrait/landscape printing under Windows

Page mode printing

Cover Open sensor

Electronic journal capability

Internal counters for hours on, cuts, print lines and errors

100 km print head life

60 million print line printer MCBF (excluding knife)

Strong break-away paper cover

1,000,000 cuts cutter life (partial cut)

Buzzer

2 color printing (4 inches per second print speed)
1
Character spacing is adjustable from 1 to 30 CPI. Typical values will be between 8 and 20 CPI
depending on the font selected. Values of 13.3, 14.86, or 17.3 are typical for each resident font.
2
CPI's greater than 16 will not be supported in NLQ fonts
Page 12
iTherm
1
Rev K
®
280 Programmer's Guide