TransAct Ithaca 280 Programmer's Manual page 265

®
ITherm 280 Color Graphics
&%UQ& Report on user store
IPCL &%UQ&
Description The &%UQ& command prints a status report.
command is to aid in universal graphic development.
&%UT<n> Redefine User Store Termination Character
IPCL &%UT<n>
Description This command allows the terminator used to signal the end of the name
field in User Store commands to be modified. The value of <n> is used
for the terminator. The value of n may be from 0 to 255.
Example If &%UT% were sent to the printer the User Store command to run
universal graphic "Demo" would be &%URDemo%.
&%CL Set Print Color
IPCL &%CL <n>
Description This command allows various colors to be selected on printer emulations
that do not support color text.
Where n: 0
1, 2, 3 Print with the Right cartridge (Typically Red, Blue, or Green)
&%UA Cycle Auto-Cutter
IPCL &%UA <m
Description This command feeds m/96 inches of paper and cycles the auto cutter.
Where m: m = m
1
28-04430
Print with the Left cartridge (Typically Black)
> <m > <m >
1 2 3
* 100 + m *10 + m
2 3
Rev K
®
iTherm 280 Programmer's Guide
The intention of the
Page 253