Table 34 Automatic Status Back (Asb) First Byte (Printer Information); Table 35 Automatic Status Back (Asb) Second Byte (Error Information) - TransAct Ithaca 280 Programmer's Manual

Programming Codes
Bit Off/On
0 Off
1 Off
2 Off
On
3 Off
On
4 On
5 -
6 Off
On
7 Off

Table 34 Automatic Status Back (ASB) First Byte (Printer Information)

Bit Off/On
0 -
1 -
2 Off
On
3 Off
On
4 Off
5 Off
On
6 Off
On
7 Off

Table 35 Automatic Status Back (ASB) Second Byte (Error Information)

11
The iTherm® 280 can not recover from mechanical errors without flushing the input buffer. All
print data will be lost if a mechanical error occurs.
Page 210
Hex Decimal
00H <0>
00H <0>
00H <0>
04H <4>
00H <0>
08H <8>
10H <16>
- -
00H <0>
40H <64>
00H <0>
Hex Decimal
- <0>
- <0>
00H <0>
04H <4>
00H <0>
08H <8>
00H <0>
00H <0>
20H <32>
00H <0>
40H <64>
00H <0>
Rev K
®
iTherm 280 Programmer's Guide
Status for Automatic Status Back (ASB)
Not used; fixed to Off
Not used; fixed to Off
Drawer kick-out connector pin 3 low
Drawer kick-out connector pin 3 high
On-line
Off line
Not used; fixed to On
Undefined
Paper is not being fed by the FEED Button
Paper is being fed by the FEED Button
Not used; fixed to Off
Status for Automatic Status Back (ASB)
Undefined
Undefined
No mechanical error
Mechanical error occurred
No Auto-cutter error
Auto-cutter error occurred
Not used; fixed to off
11
No unrecoverable error
Unrecoverable error occurred
No temporary abnormality of the print head
temperature (high temperature)
Temporary abnormality of the print head
temperature (high temperature) occurred
Not used; fixed to Off