TransAct Ithaca 280 Programmer's Manual page 65

Configuring Your ITherm
Smoothing
Paper Width
Bar Code Width
10CPI (DC2)
ESC v
nINIT/ENQ<10>
Carriage Return
Off-Line Option
Line Spacing
Input Buffer
Print Energy Control
Paper
PreHeat Temp.
Power Supply
Page Length
Cash Drawer CMD
28-04430
®
280 Printer
Flag for whether scaled
characters smoothed.
Width of the paper
installed.
Default barcode line
width.
This option defines how
CR and LF characters
are used.
This option defines what
conditions place the
printer off line.
How many lines per inch
are printed by default.
This option specifies
how large the input
buffer is.
This option will select a
paper type by brand
name.
This sets the
temperature that the pint
head tries to maintain.
The printer uses an 80W
internal supply. If an
external supply is used,
this adjustment will limit
the printer to the power
indicated.
This options sets the
default form feed page
length.
The Microline option has
two potential cash
drawer commands
Rev K
®
iTherm 280 Programmer's Guide
Enabled, Disabled
80 or 58 mm paper and
print zone from 608 to
256 dots
1 to 8
Normal, Ignore LF,
Ignore CR ,
Add LF to CR,
Add CR to LF,
Add to Both,
Use CR as Print
Normal: Cover open,
paper out, and buffer
full.
Buffer full only.
6, 7.5, or 8 lines per
inch.
40 Characters
256 Characters
1024 Characters
2048 Characters
4096 Characters
8192 Characters
One Line
Generic Black
Generic Color
Custom Black
Custom Color
Optima POS
Kanzaki P-320
Kanzaki P-350
Kanzaki P-320RB
Kanzaki P-320GB
Kanzaki P-320BB
Appleton RB100-2.3
Appleton GB100-2.3
Appleton BB100-2.3
See the section on Head
pre-heat later in the
manual.
60 to 120 Watts
0 – 60 lines.
0 disables the form feed
ESC +
BEL
Enabled
80 mm and 576 dots.
3
Ithaca Emulation:
Normal
Epson Emulation: Ignore
CR.
Axiohm Emulation: Use
CR as Print.
Normal.
Ithaca Emulation: 8
Most others: 6
8192 Characters
Generic Black
25
80
40
BEL
Page 53