Installing Cables; Connecting Power; Figure 4 Power And Communications Ports - TransAct Ithaca 280 Programmer's Manual

Setup Procedures

Installing Cables

Figure 4 Power and Communications Ports

Three cables are required to be connected to the printer.
1. DC Power
2. Communications
3. Cash Drawer

Connecting power

®
The iTherm 280 Printer is generally supplied with a built-in power supply. As an option, the
printer is available without a power supply.
Internal Supply
The internal supply connects to an outside power source with a standard two wire power cord.
28-04430
iTherm
1) DC Power
Rev K
®
280 Programmer's Guide
3) Cash Drawer/
External Buzzer
2) Communications
Power Pocket
Page 33
®