Points Of Maintenance; Batteries (1) - Fayat Group Dynapac F2500W Operation & Maintenance Manual

Paver finisher type 896
Table of Contents

Advertisement

1.2

Points of maintenance

Batteries (1)

Maintenance of batteries
The batteries are factory-filled with the
A
correct quantity of acid. The fluid level
should come up to the top mark. If re-
quired, top up the battery, but only use
distilled water to do so!
The battery terminal clips must be free of
m
oxide and protected with a special termi-
nal grease.
When removing the batteries, always
m
first remove the negative terminal, en-
suring that the battery terminals cannot
be short circuited.
Keep the battery surfaces clean and dry,
A
use only a damp or antistatic cloth
for cleaning.
Do not open batteries without plugs!
m
If the starting capacity is insufficient,
A
check and possible recharge the batteries.
Regularly check the charge of the battery and recharge if necessary.
A
F 82 4

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dynapac f2500ws896

Table of Contents