Table of Contents
Advertisement
5.6
Levelling shoe 6m, 9m
2
1
The levelling shoe includes a shoe that moves at several joints and runs on the ref-
erence surface, together with a rotary sensor that scans a reference wire on the shoe.
The levelling shoe is ideal for compensating for long bumps in the ground.
It is used on roadworks sections without tight bends.
- Adjust the working width by extending the screed.
- Push the levelling piece (1) in the extension pipe (2). Tighten the clamping bolts at
the extension pipe.
- Push the extension (3) into the levelling piece (1). Secure properly with wing nuts
(4).
- Insert the holding tube (5) in the clamp bracket (6) on the side board. Tighten the
bolts of the clamp bracket correctly.
- Fix the front pull rod (7) in the holding tube with a spring cotter pin so that the shoe
lies freely on the ground at the front.
At the back, the shoe automatically lies on the ground on account of the freely moving
A
pull rod (8).
E 12 28
4
3
6
5
10
8
9
7
Advertisement
Table of Contents
