Table of Contents
Advertisement
Item Designation
17
Ignition lock
Travel drive
18
preselector
19
Steering wheel
20
Horn
Operating hours
21
counter
22
Fuel gauge
Brief description
To activate the ignition voltage by turning the key.
- Switch off by turning the key back to its starting position.
On shutting off the vehicle, first switch off the ignition,
A
then deactivate the main switch.
Before the main battery switch is deactivated, a period
A
of at least 100 seconds must elapse after switching off
the vehicle.
For setting the maximum speed that can be reached when the
drive lever is at its stop.
The scale roughly matches the speed in m/min
A
(during paving).
The vehicle must not travel at max. transport speed
m
when the hopper is full!
The vehicle speed cannot be reduced to "0" with the
f
preselector. The vehicle advances slightly with deflect-
ed drive lever, even if the travel drive preselector is set
to zero!
The steering wheel movement is transferred hydraulically to
the front wheels.
Take the special steering ratio into consideration when
f
transporting the machine through tight curves (approx.
3 turns for a full steering lock). Danger of accidents!
For precise adjustments (position "0" = straight-ahead),
A
see the straight-ahead travel synchronisation.
Press in the case of emergencies and to indicate when the ve-
hicle starts to move!
The horn can also be used to communicate acoustical-
A
ly with the truck driver for material loading!
The operating hours are only counted while the engine
is running.
Heed the maintenance intervals (see chapter F).
Always heed the fuel gauge.
Do not completely empty the diesel tank! Otherwise,
m
the entire fuel system must be bled.
D 12 9
Advertisement
Table of Contents
