Auger Blade (8) - Fayat Group Dynapac F2500W Operation & Maintenance Manual

Auger blade (8)

If the surface of the auger blade (A) be-
A
comes sharp-edged, the diameter of the
auger is reduced and the blades (B)
have to be replaced.
- Remove the bolts (C), washers (D),
nuts (E) and auger blade (B).
Risk of injury due to sharp-edged parts!
f
Auger blades must be installed play-
m
free; the contact surfaces must be dirt-
free!
- Install the new auger blade (B); re-
place the bolts (C), washers (D) and
nuts (E) if necessary.
F 40 12
A
B
C
B
D
E