Table of Contents
Advertisement
5.5
Big ski 9 m, big ski 13 m
3
7
8
MBS6.bmp
The big ski is used for contactless sensing over a particularly large reference length.
A total max. ski length of approx. 9.30 m can be achieved with the combination of
A
1 centre element and 2 module elements together with the sensor arm extensions.
A total max. ski length of approx. 13.50 m can be achieved with the combination of
1 centre element and 4 module elements together with the sensor arm extensions.
The big ski enables the alignment of the individual sensors at the front and rear to be
A
shifted over the reference. The sonic ski can actually be positioned in front of and be-
hind the vehicle in order to guarantee safe reference sensing even on cornering.
Before starting paving, the big ski must be set, with the grade control system mount-
A
ed, to its reference (cable, kerb, etc.).
The big ski essentially consists of the following components:
- Centre element (1)
- Extension modules (2)
- Crossbeam bracket (3)
- Front swivel arm (4)
- Rear swivel arm (5)
- Sensor bracket (6)
- Sensor bracket, extendable (7)
- Arm extension (8)
E 12 18
3
6
4
1
2
5
2
7
8
Advertisement
Table of Contents
