Table of Contents
Advertisement
A hand pump (1) is located under the central control platform floor panel; it must be
A
actuated to be able to tow the machine.
Pressure for releasing the traction system brakes is built up with the hand pump.
- Release lock nut (2), screw threaded
dowel (3) into pump as far as possible
and secure with lock nut.
From serial number 2016 et seq.:
A
- Push knob (3a) into the valve body.
While pumping (next step), check
that the knob remains in the pressed
position.
- Actuate lever (4) of hand pump until
sufficient pressure has been built
up and traction system brakes have
been released.
On completion of the towing process,
m
restore the initial status.
Only release the traction system brakes
m
when the machine is sufficiently secured
against accidental rolling or is already
properly connected to the towing vehicle.
C 12 22
3
2
3a
1
4
1
4
Advertisement
Table of Contents
