Making A Call Using Redial; Making A Call Using A Speed Dial Number; Making An Emergency Call - Talkswitch TS-850i User Manual

Making a call using redial

1. In Idle mode, press the Options softkey.
2. Choose Redial, and then press the OK key. The most recently dialed number
is displayed.
3. If a hunt group is required, ensure that hunt group is inserted in front of the
phone number. This is not required if you have direct line access.
4. Press the Green Phone key to call the number.

Making a call using a speed dial number

A speed dial number allows you to quickly call one of the contacts stored in your
handset. See Specifying a speed dial number for a contact on page 39.
1. In Idle mode, dial the speed dial number assigned to the contact you want to
call (1–9), and then press the Green Phone key.
NOTE: In countries where you dial 9 to call the receptionist, speed dial 9 is
not available.

Making an emergency call

Warning: Calls to an emergency service number using an external IP extension
will not send the correct address to the emergency operator. We strongly
recommend that you apply a warning label to any external IP
extension stating:
If an emergency call is made from this phone, you must provide your address
to the emergency operator.
1. In Idle mode, dial 9 (0 in some countries) or 81–88 to get an outside line.
This is not required if you have direct line access, which automatically
chooses an outside line.
2. Dial the emergency number for your area, and then press the Green
Phone key.
You cannot make emergency calls in the following situations:
• Power failure
• Handset is out of range of the base
• Handset batteries are drained
• Firmware update is in progress
2 4
‡
T S - 8 5 0 i U S E R G U I D E