Debug; Enable Information Overlay; Enable Non-Motor Vehicle Flow Statistics; Set Image Format - HIKVISION iDS-TCD403-BI User Manual

Network Traffic Camera (for Traffic Flow Camera) User Manual
4. Click Save.

10.8 Debug

Note
The debug configurations below are only provided to debug the device by the professionals.

10.8.1 Enable Information Overlay

You can overlay the algorithm POS information and positioning frames on the captured pictures or
playback images.
Steps
1. Go to Configuration → Device Configuration → Advanced Settings → System Service .
2. Check the debug information according to your needs.
Enable Algorithm POS Information Debug
The algorithm POS information will be overlaid on the playback image when you play back
the video with the dedicated tool.
Enable Positioning Frame Debug
The positioning frames of vehicle bodies and license plates will be overlaid on the captured
pictures.
3. Click Save.

10.8.2 Enable Non-Motor Vehicle Flow Statistics

If you want to count the traffic flow of the non-motor vehicles, you can enable non-motor vehicle
flow statistics.
Steps
1. Go to Configuration → Device Configuration → Advanced Settings → Vehicle Capture and
Recognition Service .
2. Check Enable Non-Motor Vehicle Flow Statistics.
3. Click Save.

10.8.3 Set Image Format

You can enable smartJPEG which can save the storage space without influencing the resolution.
Steps
1. Go to Configuration → Device Configuration → Advanced Settings → Image Service .
2. Check smartJPEG.
43